Show us your Gamebuino clone or the last module you made.
by Sushi » Wed Nov 19, 2014 10:31 pm
Printed my very own case for the Gamebuino! The stock case had standoffs in the back which were wearing out because of my constantly opening and closing it. No problem now! It also uses four screws as opposed to the eight otherwise. Plus, it glows in the dark and's much lighter than the acrylic.
The linkasaur
-
Sushi
-
- Posts: 52
- Joined: Tue Oct 07, 2014 12:12 am
by erico » Wed Nov 19, 2014 11:24 pm
Pretty great! Well done.
...reminds me of those bone dinosaurs from a loooong time ago. Can you get a nite picture of it?
-
erico
-
- Posts: 671
- Joined: Thu Mar 27, 2014 9:29 pm
- Location: Brazil
-
by Sushi » Wed Nov 19, 2014 11:44 pm
Last edited by
Sushi on Wed Nov 19, 2014 11:48 pm, edited 1 time in total.
-
Sushi
-
- Posts: 52
- Joined: Tue Oct 07, 2014 12:12 am
by Drakker » Wed Nov 19, 2014 11:47 pm
Now you need to make one that wraps around the Gamebuino and that looks like a good old Gameboy Advance and you'll get rich instantly. ;)
-
Drakker
-
- Posts: 297
- Joined: Sun Mar 30, 2014 2:54 am
- Location: Québec, Canada
-
by Sushi » Wed Nov 19, 2014 11:49 pm
Drakker wrote:Now you need to make one that wraps around the Gamebuino and that looks like a good old Gameboy Advance and you'll get rich instantly.
I'm actually working on that right now! Your read my mind...
-
Sushi
-
- Posts: 52
- Joined: Tue Oct 07, 2014 12:12 am
by erico » Thu Nov 20, 2014 12:00 am
Terrifyingly AWESOME!
What about an original design?
-
erico
-
- Posts: 671
- Joined: Thu Mar 27, 2014 9:29 pm
- Location: Brazil
-
by Sushi » Thu Nov 20, 2014 12:02 am
Dunno about original. Will probably base it off if this just so it fits nicely. But sure, it could probably look entirely different.
-
Sushi
-
- Posts: 52
- Joined: Tue Oct 07, 2014 12:12 am
by ripper121 » Thu Nov 20, 2014 1:08 pm
Pleas share it on thingiverse.com
-
ripper121
-
- Posts: 224
- Joined: Fri Apr 04, 2014 2:02 pm
- Location: Germany
by Sushi » Thu Nov 20, 2014 11:38 pm
ripper121 wrote:Pleas share it on thingiverse.com
Linksy II
-
Sushi
-
- Posts: 52
- Joined: Tue Oct 07, 2014 12:12 am
by ripper121 » Fri Nov 21, 2014 10:15 am
thx
-
ripper121
-
- Posts: 224
- Joined: Fri Apr 04, 2014 2:02 pm
- Location: Germany
Return to Hardware Gallery
Who is online
Users browsing this forum: No registered users and 1 guest