Proto-buino

[juande]

That's an interesting looking Arduino and break-out board you've got there, what are they?

The Arduino I'm using is something like this one:
http://smartmaker.com/index.php/open-sy ... r-kit.html
(I couldn't find the exact one) It's an Arduino Uno compatible.

[Skyrunner65]

looks good.

[ripper121]

I found a nice set for Gamebuino Development:
http://www.dx.com/p/arduino-compatible- ... 0alzPl_uqE

[Hark0]

I couldn't wait for my gamebuino to arrive and I built this little prototype. Just the basics: Screen, buttons and buzzer. It's all I need for now.
...
It was fun building it! But It'll be more fun to develop some games.

Bravo!

[ItsShuriken]

I'm pretty new to arduino so i was curious as to how you make one of these.

[Myndale]

I'm pretty new to arduino so i was curious as to how you make one of these.

If you go to the hardware section on the Wiki page Rodot's put up the circuit schematic, so you can just follow that. All you really need to get started is an Arduino board to provide power and stand in for the 328p chip, a 5110 display (heaps for sale on EBay) and 7 buttons. If you want sound then you'll also need the components for that part of the circuit i.e. a speaker, resistor, NPN transistor and diode (you can follow the hardware schematic verbatim if you like but the exact values aren't critical).